Solution
Special for electroplating and sand washing
Special data for electroplating and sand washing are being prepared.
PRODUCT SERIES
Product Series
Steel Plant Special Polyacrylamide
Polyacrylamide PAM for steel mills is a water-soluble polymer. Because of its molecular chain contains a certain number of polar groups, can be suspended by the adsorption of solid particles in water, so that the bridge between the particles or through the charge and the particles to form a large flocculation. Therefore, the anionic polyacrylamide PAM can accelerate the sedimentation of particles in the suspension, there is a very obvious acceleration of solution clarification, promote filtration and other effects.
Paper Mill Special Polyacrylamide
Papermaking special polyacrylamide is widely used as a resident agent, filter aid, uniformity agent, water treatment agent, etc. in the field of papermaking. Its function is to improve the quality of paper, improve the dewatering performance of pulp, improve the retention rate of fine fibers and fillers, reduce the consumption of raw materials and environmental pollution. The effectiveness of use in papermaking depends on the average molecular weight, ionic nature, ionic strength, and reactivity of the other copolymers. Non-ionic PAM is mainly used to improve the filterability of pulp, increase the strength of dry paper, and improve the retention rate of fiber and filler; anionic copolymer is mainly used as dry and wet reinforcing agent and retention agent of paper; cationic copolymer is mainly used for papermaking wastewater treatment and filtration aid, and it also has a good effect on improving the retention rate of filler. In addition, polyacrylamide PAM is also used in papermaking wastewater treatment and fiber recycling.
Special Polyacrylamide for Printing and Dyeing Factory
Printing and dyeing factory special polyacrylamide is a composite high molecular polymer. It can effectively clarify the coal washing water, make the fine particles in the water quickly agglomerate and settle, and improve the recovery of peat, so as to save water and prevent pollution. The problem of sludge disposal produced by printing and dyeing wastewater makes manufacturers have a headache. Printing and dyeing sludge is generally high in inert substances. For example, the sludge produced by Denim and clothing washing and bleaching wastewater has a high sand content, while the content of organic matter and pathogenic bacteria is low, and the calorific value is low. Generally, the content of heavy metals is high (compared with the sludge produced by urban domestic sewage). As the printing and dyeing industry itself due to the use of raw materials, product varieties, product processing methods and other different sludge components are not the same, the use of sulfur dyes enterprises, the content of sulfide is bound to be higher. Therefore, the selection and dosage of printing and dyeing sludge treatment should be treated differently according to the different sources of sludge, starting from the aspects of sewage treatment scale, sludge yield, pharmaceutical source, pharmaceutical dosage, operating cost, moisture content of mud cake, etc., according to local conditions, comprehensive consideration.
TYPICAL USERS
Typical User
WeChat Public Number
Tiktok